Electric Actuators

 

Valvcon™ electric actuators provide efficient, reliable service and combine the proven performance of the industry’s most rugged platform with the widest variety of electronic control options.

v series1

V-Series

Quarter-Turn Actuators Built for Hard Work

Highly efficient, compact, and rugged (NEMA4, 4X, 7&9)

Up to 3000 inch pounds (250 ft. /lbs.) of breakaway torque

On-off duty, modulating, proportional, or two wire network control

Hardened steel gears throughout, with manual override

ISO5211 mounting interfaces and visual position indicator

Easy access to cams and switches

75% duty cycle, thermal overload cut-out, fuse protection for inputs and outputs

Control package features:

Simple digital set up for 4-20mA, 0-10VDC, 0-135ohms

Auto calibration

Switch selectable input control signal type position feedback signal type, and signal fail position push button CW/CCW control

Adjustable dead band and speed control

Locked output stall protection

Reverse acting and split ranging without any wiring change

Options and accessories:

Analog control

Isolation/relay control

Holding brake

Heater

Auxiliary switches

CSA certification

 

Click here for product brochure

ADC series1

ADC Series

ADC Series available features:

Internal rechargeable back-up power pack

Can provide up to 10 complete cycles on internal power

Power pack is compact and fits easily into the standard enclosures

No hard-wiring or other complex operations required

Can be activated by power loss or signal from an external sensor

Long battery life – up to 5 years

Visual charging and full charge indication on board

Sleep mode preserves back-up power for extended outage situations

Push button CW/CCW on back-up power

Highly efficient, compact, rugged (NEMA4, 4X, 7&9)

Up to 3000 inch pounds of torque

On-off duty, modulating or proportional control

Hardened steel gears throughout

ISO5211 mounting interfaces and visual position indicator

80% duty cycle, thermal overload protection and up to 30 starts per minute

Applications

Applications

=

lc actuator1

LC Series

Simple, reliable, high cycle life

Break-away torque to 600 inch pounds

Uni-directional 24VAC, 115VAC or 230VAC

Reversing 12VDC, 24VDC, 24VAC, 115VAC & 230VAC

Die cast, powder coated, zinc alloy base

UV resistant composite cover for weatherproof NEMA 4, 4X applications

Male or female output with ISO 5211 mounting pattern

Low maintenance, permanently lubricated

Highly efficient, hardened cut steel spur gears throughout

Compact, low profile package – 4.73”X 5.05”X 5.95”, 6.0 lbs.

Position indicator and override available on reversing models

On/Off service options include:

Heater

Auxiliary switches

Three position/center-off and timer control

v series1

I Series

Based on the proven and rugged V Series platform for AC applications. Network choices include:

AS-Interface™ – On/Off applications for up to 31 devices via unshielded 2-wire.

LonWorks™ – Lon Mark 8110 Compliant for On/Off applications.

DeviceNet™ – CAN technology for up to 63 devices via 4-wire trunk network.

Profibus-DB™ – 4-wire control, 32 devices via gateway slave to Profibus DCS/PLC’s.

Modbus™ - 4-wire control, 32 devices via gateway slave to Modbus DCS/PLC’s.

Foundation Fieldbus™ – via internal I/O module for up to 32 devices per network.

Features include:

Highly efficient, compact, rugged (NEMA4, 4X, 7&9)

Up to 3000 inch pounds of torque.

Hardened steel gears throughout with manual override

ISO5211 mounting interfaces and visual position indicator

75% duty cycle, thermal overload cut-out, fuse protection for inputs and outputs

Push button CW/CCW control,

Options and accessories:

Holding brake

Heater

Auxiliary switches

v series1

Q Series

Oil Field Service and Remote Applications

Designed for low current draw, remote solar or battery applications

50mA idle current, 1.1 Amp maximum running current

600 inch pounds torque

Two auxiliary switches

12VDC or 24VDC input power with LED voltage input indicator

Highly efficient, compact, rugged (NEMA4, 4X, 7&9)

On-off duty, stop in place when power is removed

Low maintenance, permanently lubricated

Hardened steel gears throughout

ISO5211 mounting interfaces and visual position indicator

80% duty cycle, thermal overload protection and up to 10 starts per minute

CSA Certification

Options include:

Position indicator

Manual override

Holding brake

Declutching hand wheel

Serving Customers Worldwide

Kings Energy Services works with customers all over the world in more than 15 industries delivering premium quality value products and services. Find out more about the industries we serve worldwide.

Learn More